FIBARO Swipe - Gestures Configuration; Step 1: Access Swipe Settings; Step 2: Assign Reaction; Step 3: Select Device to Control

8
Gestures configuration
After the device is added, you can
proceed with its configuration in the
Home Center interface.
Click the icon in the top right
corner of the FIBARO Swipe window.
Select a gesture to which you want
to assign reaction and click the
plus icon (New Reaction).
Select the device you want to control.
From the available options select the
reaction of the controlled device and
complete the setup by clicking "Save".
TIP: Configuration of sequences is described
later in this manual.