Fidelis Direct/Internal 10G - Sensor: Network Port and Cabling Requirements

QUICK START GUIDE
Fidelis Network™ Sensor Appliances
www.fidelissecurity.com ©Fidelis Cybersecurity
4
3. Sensor: Network Port and Cabling Requirements
Fidelis Network Sensors are designed to process different traffic capacities and different types of
network connections, including: 1GbE, 10GbE, 1Gb-SX, and 10Gb-SR. Each appliance must be
connected to the various networks with appropriate cables and in some cases, SFP+ transceivers.
The tables below describe the physical connection and cable type associated with each port on the
appliance.
Direct/Internal Appliances With 1GbE rj45/Copper Ports
Cable Type
Admin
8P8C "RJ45" (copper) Cat 5/5e/6 patch cable
Prevent
8P8C "RJ45" (copper) Cat 5/5e/6 patch cable
Monitor-A
8P8C "RJ45" (copper)
Cat 5/5e/6 patch cable
Monitor-B
8P8C "RJ45" (copper) Cat 5/5e/6 patch cable
Monitor-C
8P8C "RJ45" (copper)
Cat 5/5e/6 patch cable
Monitor-D
8P8C "RJ45" (copper) Cat 5/5e/6 patch cable
ILO
8P8C "RJ45" (copper)
Cat 5/5e/6 patch cable
Figure 3: Rear Port Assignments — Sensors rated up to 1Gbps (Direct, Internal, Mail, and Web)