PRINT OPTIONS 80
Expert Settings options
To access the following options, click Expert Settings.
Expert Settings has three modes:
• Color Input: use these options for color printing (page 80).
• Gray & Black Processing: use these options for grayscale or black & white printing
(page 81).
• Output: specify the output profile to use for printing documents (page 82).
Color Input
Option Information
CMYK/Grayscale Source
Specify the simulation profile to be used for the current print job.
For more information, see Color Printing.
Use embedded profile when
present (CMYK)
When this option is enabled, the E100 ignores the CMYK/Grayscale Source option and uses the
CMYK profile embedded in the print job as the CMYK source profile.
CMYK/Grayscale Processing
Method
Specify the simulation method for CMYK print jobs.
Select Full (Source GCR) for a more complete and accurate simulation. Full (Source GCR) applies
colorimetric transformations that adjust hue as well as output density and produces output that
maintains the same amount of black as the source document.
Select Full (Output GCR) to apply the same simulation method as Full (Source GCR), except that the
output produced contains a black amount determined by the Output Profile.
Select Pure Primaries to use one-dimensional transfer curves to adjust density output of individual
color channels.
For more information, see Color Printing.
RGB Source
Specify a source color space definition for printing RGB images, objects, and text.
For more information, see Color Printing.
Use embedded profile when
present (RGB)
When this option is enabled, the E100 ignores the RGB Source option and uses the RGB profile
embedded in the print job as the RGB source profile.
To Next Page
