Fiery TASKalfa 3051ci - Variable Data Printing (VDP) Options

PRINT OPTIONS 85
Variable Data Printing (VDP) options
The E100 is compatible with the following variable data printing languages:
• FreeForm and FreeForm 2
For more information on VDP languages, see
Variable Data Printing.
When you create VDP documents, the following settings for the master document and
variable document must match:
• Color Mode
• Combine Separations
• Duplex
•Document Size
•Stapler Mode
The following setting for the variable document overrides the corresponding settings in the
master document:
•Output Tray
Option Information
Create Master
To create a FreeForm master from this job, specify a number to assign to the FreeForm master file.
Command WorkStation allows you to select up to 100 FreeForm Masters.
For more information, see Variable Data Printing.
Use Master
For variable data print jobs, specify a FreeForm master number to be used for the job.
Command WorkStation allows you to select up to 100 FreeForm Masters.
For more information, see Variable Data Printing.
Preview Master
Click Preview Master to generate a low-resolution image of your master page.
Print Master
Use this option to verify or confirm your Master page.
For more information, see Variable Data Printing.
Printer’s default reflects the setting specified in E100 Setup.
Remove White PPT Background
Select On when using Microsoft Office PowerPoint to create variable data in conjunction
with FreeForm.
This option removes the white background from PowerPoint files.
Pages Per Record
Use this option to define record-based (rather than job-based) finishing, based on the number entered.
This option is used with the Define Record Length option.
For more information, see Variable Data Printing.