COMMAND WORKSTATION 21
TO DEFINE MEDIA FOR SPECIFIC PAGES
1 In the Mixed Media dialog box, click New Page Range.
The Page/Page Range Media dialog box appears.
2 Type pages and page ranges as comma-separated values (for example: 3,9–14,18).
3 Choose other settings, as required, from the pull-down menus.
If you assign a new media type to the back side of a duplexed sheet, a blank page is inserted to
force the assigned page content to the front side of the next sheet.
4 Click Add Definition after each media setting that you define.
5 Click Close to return to the Mixed Media dialog box.
TO INSERT BLANK PAGES
1 Click New Insert in the Mixed Media window.
The Insert Blank dialog box appears.
2 Indicate whether to insert the blank before or after the target page. Define the target
page as the first or last page in the document, or as a specific numbered page.
3 Choose other settings, as required, from the pull-down menus.
4 Click Insert after each blank page that you define.
5 Click Close to return to the Mixed Media window.
To Next Page
Loading...
