COMMAND WORKSTATION 22
Troubleshooting
When troubleshooting basic connection and software problems with Command
WorkStation, see the following sections. For additional troubleshooting information,
see Command WorkStation Help.
Command WorkStation cannot connect to the E100
If you cannot connect to the E100 or locate the E100 from your computer, contact the
network administrator. The administrator may need to troubleshoot your network
connections and check settings on the servers that you print to. If settings have changed, it
may be necessary to reconfigure the E100 (see Configuration and Setup).
If you can connect to the E100 with another utility, you may need to reconfigure the
Command WorkStation connection to the E100 (see page 13).
If you configured the E100 and set up client computers and network servers according to the
instructions in Configuration and Setup, print a Test Page. If you can print the Test Page, but
still cannot print a document from a remote computer, ask your network administrator to
troubleshoot the network connection.
If you cannot connect and cannot print a Test Page, check the copier touch panel for error
information.
Command WorkStation does not respond
If Command WorkStation is unresponsive, use the following troubleshooting guidelines.
IF THE COMMAND WORKSTATION WINDOWS DO NOT UPDATE
1 Log off and then quit Command WorkStation.
2 Restart Command WorkStation or restart the computer.
If the Command WorkStation windows do not update or no jobs are displayed, and the
mouse has no effect (you cannot select a job or a window, use a right mouse command, or
select a menu item), the E100 is offline or network communication has failed.
TO FORCE AN EXIT FROM COMMAND WORKSTATION
1 On a Windows computer, press Ctrl-Alt-Delete and use the Task Manager to close Command
WorkStation.
On a Mac OS X computer, choose Apple menu > Force Quit, select Command WorkStation, and
then click Force Quit. Or, press Command+Option+Esc, select Command WorkStation, and then
click Force Quit.
2 At the E100, disconnect and reconnect the network cable, and then try printing a Test Page or
Configuration page.
3 If printing fails, restart the E100.
To Next Page
Loading...
