1. Easily mount K678 microphone to the stand using the screws.
HEADPHONE OUTPUT
COMPUTER SETUP
Apple MAC OS
1. Plug the free end of the provided USB cable into the USB port on your computer.
The microphone’s green LED will illuminate, indicating the microphone is receiving
power. Your computer will automatically recognize the USB device and install a
driver.There may be no pop- up window or message though.
2. To select the K678 as your audio input, first, open your System Preferences.
1. Pls select “K678-Stereo Microphone”as the input device from the setting when using
recording software. if you need to monitor your sound from 1/8" (3.5 mm)headphone
jack of computer, pls Choose "Realtek High Definition" .Choose output “K678-Stereo
Microphone” if you monitor from the microphone jack.
Recording Software Settings
1. If computer prompts that it’s unable to identify USB devices, please restart computer
and replug the microphone into other USB port.
Note: (Applicable for MAC and Windows)
3. Select the Recording tab, and choose “K678-Stereo Microphone” as the default
device. When you speak to mic, bar-type icon will turn green and bounce. If it
remains unchanged, please reset computer and replug in the USB port. If there’s
still no “K678-Stereo Microphone”, please contact FIFINE after service.
Notice: logging out of AUDACITY(or other recording software) if you find usb microphone
is unavailable. And then plug in mic first , secondly log in software again.
Positioning your microphone
It is important to position the microphone directly in line (on axis) with the person
speaking/ singing or instrument (or other sound source) to achieve the best frequency
response of the microphone. For use in speaking/singing applications, the ideal
placement for the microphone is directly in front of the person speaking/singing. The
same placement is optimal when miking an instrument such as an acoustic guitar,
drums or piano. Experiment with different mic placements to find the best sound for
your particular setup.
Protecting your microphone
Avoid leaving your microphone in the open sun or in areas where temperatures
exceed 110° F (43° C) for extended periods. Extremely high humidity should also be
avoided.
Selecting software
You have many choices in recording software. Audacity, available for free online at
http://audacity.sourceforge.net/, is a widely used software program that provides
basic recording software.
Note: The microphone must be plugged in first and secondly turning on the
recording software.
2. Make sure to click off “Listen to this device” in your computer system when you are
using any recording software, or else your would hear duet of yourself just like too
much echo.
Microphone Capsule - Condenser microphone element with cardioid polar pattern.
LED Indicator - Green light shows microphone is on. Red light shows microphone
is muted.
Headphone Jack - 1/8 inch (3.5 mm) stereo jack for monitor your voice in real time.
Headphone Volume - Control the volume of sound in your headphone.
USB Cable (6.56’) - Type A to Mini B USB Cable.
IMPORTANT NOTICE
Setting your software levels
Correct adjustment of microphone level is important for optimum performance. Ideally,
the microphone level should be as high as possible without overloading the input of
your computer. If you hear distortion, or if your recording program shows levels that
are consistently overloaded (at peak levels), turn the microphone gain (or level) down,
3. There are several ways to improve the recording by using Audacity.Come to
https://fifinemicrophone.com/blogs/news to search the better solution or SEARCH
WIDGET for your interested subject in our blogs.
Note:
* 1. Fully Plug your earphone into the 3.5mm earphone jack of microphone.
GUIDELINES FOR USE
Choose your output setting
When you plug microphone to your pc, it cancels the audio from any other audio
file played or there’s no sound on the playback, you need to manually select the
"speaker (Realtek High Definition Audio)" as the default playback device if you want
to output sound via the computer built-in speaker.
Mute Button - Press the button for mid-stream when you need to have a rest.
Microphone Gain - Control the sensitivity of the mic capsule.
5/8 inch Male to 3/8 inch Female Mic Thread Screw Adapter-For connecting
Microphone toSuspension Boom Scissor Arm Stand(Not included) if you need.
2. Adjust and pivot the microphone in relation to the sound source to optimize your sound
quality.
3. The front of the microphone should be facing the sound source. (A FIFINE icon and LED
indicate the front of the microphone; the microphone gain and headphone volume knob
displayed on the rear of the microphone.)
4. Maintain a distance of approximately 15-20 cm(5.9-7.9 in.) between the sound source
and the microphone.
5. Fully plug the provided USB cable with the right angle into the USB output at the base
of the microphone
6. You can use the included 5/8" male to 3/8" female adapter to install the mic on the
standard boom arm.
5/8" Male to 3/8" Female Adapter
Press the button on the microphone to turn the mute on/off. Mute is indicated by a LED
on the microphone body.
Red = Microphone is muted
Green = Microphone is on
MUTE BUTTON OPERATION
USB Output - Connect directly to your computer via the included USB cable.
1
5
-
2
0
c
m
(5
.
9
-
7
.
9
i
n
.
)
RearFront
5. Click the output tab and make certain “K678-Stereo Microphone” is selected as
the default output device.
(This should have happened automatically.)
1. Right-click the speaker icon at the bottom right of the screen. Click "Sounds".
Please wait for a few secs when first time operation, since driver of microphone
takes time to automatically install. There may be no pop-up window or message
though. (If plugging USB connector in a different USB port, driver installs again).
2.Confirm the loudspeaker is open.
Click the loudspeaker is being used-”Properties”--“levels”,drag progress bar to
adjust volume of output
4. Two way to monitor your speaking voice:
1) Output from the microphone jack--Please plug earphone in the headphone jack on the
base of K678, you can hear your voice at once ,no need to set the output devices
through computer and no need to click “listen to this device” under the “listen” tab.
2) Output from the Computer-Plug your earphone into the 3.5mm earphone jack of
computer/laptop, manual operate output from “Realtek High Definition Audio” under
“Playback”,then click Microphone“K678-Stereo Microphone”- “Properties”-“Listen”-
click “Listen to this device”-“Apply”.
3. Next, click Sound to display the Sound preference pane.
4. Click the Input tab and select the “K678-Stereo Microphone” as the device for
sound input.
10
1112 1617
K678 includes a standard 1/8"(3.5mm) headphone jack for monitoring and playback.
1). Click off “Listen to this device” when you are using any recording software or
chatting software(Skype).
Make sure that the microphone gain and headphone volume knob is not on the zero
position.
When your preliminary setup is completed (Choose "K678-Stereo Microphone"as input),
and your USB microphone is connected to your Computer's USB port (the microphone's
green LED is illuminated), Use K678 Headphone output to monitor your microphone
recording in real-time or tracks recordings from your computer.
* 2. Plug earphone in the mic jack, you can hear your voice at once, no need to log in any
recording software or click” listen to this Device”.
5. Double click the “K678-Stereo Microphone” to open the Microphone Properties
window. Right click the speaker icon under the Levels tab, change to decibels from
percentage. To get the best sound of the mic, please adjust the mic level during this
range (+6.8 to +10.0 dB), when the output volume of the speaker is max.
lnput: K678-Stereo Microphone
131415
Click!
CONTROL PANEL
4. For windows computers, we recommend audacity, and for Apple computers, you
can use Apple's own QuickTime player to test the recording.
2). Make sure the led is on green color indicate that microphone's on.
NOTE:
Note:
2. If mic recognized but no sound comes out, please check whether System Sound is
mute and whether you have turned volume control on microphone to minimum.
3. If mic recognized but no sound out, and your computer runs windows 10, please go
to settings > privacy > microphone and click the Allow apps to access the
microphone to ON then restart.
123456789
CONTACT US
Get Social:
Facebook page: http://bit.ly/FifinePage
Contact Info:
Email: web@fifine.cc
Guidelines For Use
Computer set-up(windows&)MAC OS
Recording Software Settings
Important Notice
1 X Microphone
1 X Adjustable Desk Stand
1 X 6.56' Type A to Mini B USB Cable
1 X 5/8" Male to 3/8" Female Adapter
1 X User’s Manual
WHAT’S IN THE BOX?
3-8
9-15
15-16
16-17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS
WARRANTY
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front
K678
USER’S GUIDE
Sound
Source
Mute Button
Microphone Gain
Headphone Volume
Front
Rear
Listen music from computer
Output: Pls choose correct output
* 3. If there is no sound out when you plug earphone into the base of microphone, check
by clicking “K678-Stereo Microphone”- “Properties”-“Levels”. make sure the speaker
and the microphone is on under the levels tab.
Typical Frequency Response Curve
Power Supply:
Operating Current:
Polar Pattern:
Frequency Response:
Sensitivity:
Equivalent Noise Level:
Dynamic Range:
S/N Ratio:
Max.SPL:
SPECIFICATION
5V
80mA
Uni-directional
40Hz—20kHz
-45±3dB (at 1kHz)
66dB-A
88dB
85dB
130dB
0
30
606060
90
120
150
180
210
240
270
300
330
+20
+10
0
-10
-20
-30
2050100200500
1K2K
5K10K20K
Frequency Response (0dB=1V/pa)
Frequency Hz
After installation, you can test the mic by speaking to it. If the mic picks up no
sound, please follow procedures below.
either through your control panel (or system preferences) settings, or through your
recording software. If your recording program shows insufficient level, you can
increase the microphone gain either from the control panel (or system preferences)
settings or through your recording program.
Fifine microphone warrants its hardware product defects in materials and
workmanship for a period of one year from the date of original retail purchase,
provided the purchase was made from an authorized Fifine microphone dealer.
This warranty is void if the equipment is altered, misused, mishandled, suffers
excessive wear or is serviced by any parties not authorized by Fifine Microphone.
For warranty service ,contact your local distributor or web@fifine.cc
B2B Version:Feb-11-2020
To Next Page
Need help?
General
