Fiio M6 - Buttons and Ports Introduced; Buttons and Ports Explained

4
2. Buttons and ports explained
1) Touchscreen (16 million colors, 480x800 pixels): Displays the user interface and other
information; for operating the unit via screen touches and/or in conjunction with buttons on the unit;
2) Power / Lock: While M6 is powered off, hold for 2s to turn on; while powered on, hold to
display power off / reboot menu; press briefly while powered on to turn screen on / off; Press and
hold for 10 seconds to reboot.
3) Volume “+” / “-“ button: When the screen is ON, press briefly to change volume by one
increment, hold down to change volume continuously until the maximum volume (“+” button) is
reached or the player is muted (“-” button); When the screen is OFF, press briefly to change volume
by one increment, hold down to skip to Previous/Next track.
4) Play / Pause: Press while playing to pause music, press while paused to continue playback;
5) Micro SD card slot: Supporting up to 512GB capacity
6) Indicator light: Red light will be on for some seconds and then off during the boot; light is OFF
in working condition, red light when charging, turn off indicator light when power off;
7) Type C USB data/ charging port: Used for charging, transmitting data, USB Audio output.
The DC5V 2A adapter is recommended for charging and can be fully charged in 2 hours.
8) 3.5mm PO/LO: Shared Phone/line output port. Switch between the two outputs in M6 Settings
->Audio -> Select output.
CTIA-spec headsets with in-line remote control supported with the following remote control
operation (single button remotes and main button of multi-button remotes supported):
Volume Up/Down: click to turn up/down the volume once, hold to turn up/down the volume
continuously to Max volume/Mute;
Play / Pause: press main button once briefly to toggle between play and pause;
Next track: double-click main button quickly;
Previous track: triple-click main button quickly;