2. Bluetooth function
M9 supports virtually all Bluetooth formats including the high-resolution ones for your ultimate listening
pleasure, including: 24bit aptX-HD（also backwards compatible with aptX), LDAC and HWA. M9 can also
be a Bluetooth transmitter or a Bluetooth receiver.
Bluetooth transmitter
To use the M9 with new Bluetooth devices (e.g. Bluetooth earphones, speakers, remote controls), the M9
must first be paired with the device as follows：
1) Tap the Bluetooth in setting as shown in the picture below;
2) If Bluetooth on the M9 is off, turn it on by clicking the switch on the upper right to the “ON” position
on the right;
3) Tap “SEARCH FOR DEVICES” at the bottom of the screen to have the M9 search for and display nearby
Bluetooth devices;
4) Tap the name of your Bluetooth device to pair with it. Successfully paired devices will appear under the
“PAIRED DEVICES” list:
Before connecting Bluetooth device, you can select the Bluetooth audio codec which you want to use
as follows:
1) Enter the Settings-Audio settings interface
2) Click on the Wireless Playback quality, select the one you want to use, then disconnect the current
connection and connect with your Bluetooth device again.
To Next Page
Loading...