Table of Contents
Industrial Dynamics Company, Ltd. Document 40274-0600 III
Table of Contents
Radiological Safety Information
Understanding Radiological Safety VII
Radiological Safety Guidelines VIII
Radiation Measurement Testing Data VIII
Radiation Warning Labels IX
Filtec Model FT-70/75 Radiation Exposure Profiles X
Chapter 1: FT-70/75 System Overview
Inspection System Description 1-3
Fill Level Inspection Basics 1-4
Rejection Control Basics 1-5
Optional System Features 1-6
High Cap/Bulged Can Detection 1-6
Missing Cap/Missing Lid Detection 1-6
Dud Detection 1-6
Low Foam Detection 1-7
Foil Seal Detection 1-7
Smashed Container Detection 1-7
Down Container Detection 1-7
Label Inspection 1-7
Reject Sorting 1-7
Serial Interface 1-7
Programmable Logic Controller Interface (PLC) 1-7
Chapter 2: Operating Your FT-70/75
Starting-Up Your FT-70/75 2-3
The Safety Interlock Switch 2-4
Container Changeover 2-5
Selecting the Container Type to be Inspected 2-5
Adjusting the Inspection Head Height 2-5
Adjusting the Conveyor Guide Rails 2-7
Adjusting the Centerline Trigger Bracket Height 2-7
Adjusting Optional Sensors and Sensor Brackets 2-8
Aligning the Missing Cap Sensor 2-9
Aligning the High Cap Sensor 2-11
Aligning the Smashed Bottle Sensor 2-13
Aligning the Inspection Trigger (Bottles) 2-15
Aligning the Missing Lid Sensor 2-17
Aligning the Bulged Lid Sensor 2-19
Aligning the Down Container Sensor 2-21
Aligning the Inspection Trigger (Cans) 2-22
To Next Page
Loading...