Fimar MF/900 - Technical Specifications

- 9 - English language
GB
MF/900 MICROWAVE
OVEN
A) Control panel: it is equipped with the control devices needed to operate the appliance
(see "Control descriptions").
B) Oven door: it is associated with an interlock device (micro switch ). The cook cycle
stops when the door is opened.
The cook cycle resumes operations from where it left off when the door is closed.
C) Processing chamber: it is equipped with electrical resistances (for grill operating
mode) and a magnetron device (for microwave operating mode) to process food prod-
ucts.
The processing chamber is equipped with a rotating grill (and removable plate (D))
which rotates during microwave or combo operating modes to guarantee even
processing.
Important
In microwave or combo mode (microwave and grill) do not use the appliance with-
out the rotating grill and removable plate.
TECHNICAL SPECIFICATIONS
The table lists the type of container materials required according to the appliance oper-
ating mode (microwave, grill and combo modes).
Table 1: Technical appliance specifications
Description Unit of measure MF/900
Power kW 1,4
Power supply V/Ph/Hz 230V/1N/50Hz
Processing chamber capacity Lt. 23
Processing chamber dimensions mm 328x300x205
Appliance dimensions mm 510x425x305
Packaging dimensions mm 570x430x320
Net weight kg 17
Installation type Counter installation
Table 2: Container materials
Container material
Microwave
operations
Grill operations
Combo operating
mode
Heat resistant glass Yes Yes Yes
Heat resistant ceramic or porcelain Yes Yes Yes
Microwavable plastic Yes No No
Wax paper Yes No No
Tin foil No Yes No
Metal No Yes No