- 30 - English language
INDUCTION PLATES
CONTROL DESCRIPTIONS
The appliance is equipped with the
listed control devices, required to
run its main functions.
A) Button: used to turn the appli-
ance on and off.
B) Indicator light: when on, it
means the cutting blade is on.
C) Display: used to display set pa-
rameters (power, temperature
and time).
D) Button: used to set appliance
operating mode (power mode or
temperature mode).
E) Button: used to set processing
time.
F) Button: used to increase the val-
ue of the selected parameter.
The value of the selected param-
eter increases each time the but-
ton is pressed.
G) Button: used to decrease the value of the selected parameter.
The value of the selected parameter decreases each time the button is pressed.
H) Indicator light: when on it indicates that the parameter on the display is processing
power.
L) Indicator light: when on it indicates that the parameter on the display is processing
temperature.
M) Indicator light: when on it indicates that the parameter on the display is processing
time.
N) Main power switch: used to turn appliance power on and off.
IDM-34602000800.tif
G
H L
N
E
F
M D A
B
C
To Next Page
Loading...