Fimar PF40E - Control Panel Overview; Changing the Extrusion Mould

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ FRESH PASTA
EN
istruzioniIDM
- 10 - English Language
DESCRIPTION OF CONTROLS
The appliance is fitted with the listed control devices required to activate its main functions.
G) Button: activates and disables operation of the appliance.
H) Button: to select the kneading cycle; the timer is set when pressed repeatedly.
I) Button: to select the extrusion cycle.
J) Display: to view the kneading time during the work cycle.
K) Indicator light: when on it means that the appliance is powered electrically.
CHANGING THE EXTRUSION MOULD
1. Unscrew the ring nut (L).
2. Replace the extrusion mould (M) with the
one suited to the type of processing to be
carried out.
3. Retighten the ring nut (L).
L
M
IDM-34606300301.pdf
PF25E - PF40E
G
I
H
J
K