Safety tips:
If the propeller is damaged, please replace the propeller to ensure flight safety
and efficiency.
Check that the propeller is properly installed and fastened before each flight.
Stay away from the rotating propeller to avoid cutting.
Assembly & disassembly of propeller
Attach propellers according to color mark on the motor axis.
Align the propeller against the clamp of the motor shaft and ensure that
the propeller is pressed to the root of the motor shaft.
Rotate the propeller to the end in the direction of the lock mark, and the
propeller will bounce and lock.
Press the propeller forcefully and rotate the propeller along the opposite
direction of the lock mark to remove the propeller.
Note: Take the installation of reverse propeller as an example.
Turning on and off the aircraft
Short press + long press the power button until the aircraft indicator
lights are on, meaning turned on.
Short press + long press the power button until the aircraft indicator
lights are off, meaning turned off.
To Next Page
Loading...
