seconds to enter Set Mode. The first setting will
begin flashing. You can press the “SET” button
again to skip any step, as defined below.
a)
12/24 hour format
b)
Manual time setting (hours/minutes)
c)
Date format setting(D-M/ M-D)
d)
Date setting(year/month/day)
e)
Temperature unit setting(°C/°F)
f)
Rainfall unit setting(mm/in)
Note: In the setting mode, press” RAIN1/+”
or ”RAIN2/-” buttons to change or scrolls the value.
Hold the button for 2 seconds can change fast.
The setting mode will return to normal display while
idle 15s or by pressing the button “HISTORY”.
3.3 Rain History Mode
In Normal Mode, short press the button “HISTORY”
once to enter Day Rain History Mode, press
“HISTORY” button twice will enter Month day history
view mode；
Short press the button “RAIN1/+” or “RAIN2/+” to
check the history rainfall data of the days or month
displayed.
To Next Page
Loading...