3.4 MIN/MAX Mode
In Normal Mode, press the button “HI/LO” to
alternate the following max/min records with
timestamp:
a)
Indoor temperature Max
b)
Indoor temperature Min
c)
Indoor humidity Max
d)
Indoor humidity Min
Note: Long press button “RAIN 2/+” over 5s will
clear the current max/min records with timestamp
displayed.
The setting mode will return to normal display while
idle 15s
3.5 HI/LO Alarm Set Mode
In Normal Mode, long press the "HI/LO" button for 2
seconds to enter Alarm Set Mode. You can press
the "HI/LO" button again to skip any step, as defined
below.
a)
Time alert ON/OFF;
b)
Time alert value setting(hour/minute);
c)
Rainfall Rate HI alert ON/OFF;
d)
Rainfall Rate HI alert value setting;
e)
Rainfall Event HI alert ON/OFF;
f)
Rainfall Event HI alert value setting;
g)
Indoor temperature HI alert ON/OFF;
To Next Page
Loading...
Need help?
General