Fine offset WH2810 - OLE_LINK93; OLE_LINK92; 4.1.2 Set Mode Operation

Color Screen Multi-channel Weather Station User Manual
11
4.1.2 Set Mode Operation
While in Normal Mode, press and hold SET/CH key 2 seconds enter setting
mode. The first setting will begin flashing. You can press the SET/CH key
again to skip any step, as defined below.
1. Beep on/off. The BEEP (ON or OFF) setting will begin flashing. Press
the TEMP./+ key to toggle between BEEP ON and BEEP OFF.
2. MAX/MIN record reset ON/OFF. Press SET/CH key again, RST (ON
or OFF) will begin flashing. This function is to switch off/on the
automatically reset of MAX/MIN record at 0:00 every day, which is
default turned on. Press TEMP./+ key to toggle between RST ON and
RST OFF.
3. Time Zone Settings. Press the SET/CH key again to adjust the Time
Zone (TZ) setting.
Press the TEMP./+ key or BARO./- key to adjust the time zone from
-12 to 12, based on the number of hours from Coordinated Universal
Time, or Greenwich Mean Time (GMT).
4. 12/24 Hour Format. Press the SET/CH key again to adjust the 12/24
hour format setting. Press the TEMP./+ key to change between 12
hour and 24 hour format.
5. Change Hour. Press the SET/CH key again to set the hour. Press the
TEMP./+ key or BARO./- key to adjust the hour up or down.
6. Change Minute. Press the SET/CH key again to set the minute. Press
the TEMP./+ key or BARO./- key to adjust the minute.
7. D-M/M-D Format. ress the SET/CH key again to adjust the D-M/M-D
format setting. Press the TEMP./+ key to change between D-M and
M-D format.
8. Change Year. Press the SET/CH key again to set the calendar year.