15
CONTENTS
Types of Veri cation Methods
The terminals offer various verification methods which include User ID (PIN), Password (PW),
and RFID (RF). You can configure the terminal to offer multiverification methods. Press Menu
> Options > Access Options > Group VerType > Select the Group > OK > Select the time > OK
> Down arrow and select Verification Type > OK
The terminals support the following combinations of verification:
VERIFICATION TYPE DESCRIPTION
PIN User ID only
PW Password only
RF RFID Card only
PW/RF Password or RFID Card
PW & RF Password and RFID Card
Go to Chapter 8: Access Options to learn more about Grouping and Group Definition.
Adding User Information
User information can be added into FingerTec terminals through the software software.
After the information is updated, sync software with the terminal to display the informa-
tion.
Deleting User
Only an administrator can perform user deletion at the terminal. To delete certain user(s),
press Menu > User Manage > Delete > Input User ID > The terminal will tell you the veri-
fication method enrolled by the user ID > OK > Prompting you to Delete User > Press OK
> Confirmation is required > OK as Yes and Esc as No
Access Level/Privilege
The terminal offers various types of access level or privilege.
PRIVILEGE USER ROLES
Normal User Only use the terminal to verify your identity. You cannot access
into the Menu and make changes on settings and system
Enroller You are allowed to access into the menu to enroll user only.
Administrator You are allowed to access into the menu to enroll users only and
edit simple settings and system excluding access options and
advanced options
Supervisor You are allowed to access into the menu to enroll users and edit
settings and system
To Next Page
Loading...
