FingerTec TA100C Series - Page 4

5
TA100C MODEL
TA200 PLUS MODEL
Cable Protector
To keep cables intact.
Siren Cable
For connecting the terminal to
external siren.
USB Extension
To connect to the USB
port of a computer for
uploading and down
-
loading of data.
Screwdriver
Use the screwdriver to
open the back plate of
ngerprint terminal and
to install the back plate
against a wall.
DC 5V Power Adaptor
For supplying power to the terminal.
A Packet of Bolts
Use the screws to hold the back
plate of the terminal against a wall.
RFID Cards (5 pieces)
* Exclusively for TA103C-R model only
For card enrollment and verication.
USB Extension
To connect to the USB port
of a computer for uploading
and downloading of data.
RFID Cards (5 pieces)
For card enrollment and verica-
tion.
Screwdriver
Use the screwdriver to open
the back plate of ngerprint
terminal and to install the back
plate against a wall.
A Packet of Bolts
Use the screws to hold the back
plate of the terminal against
a wall.
DC 12V Power Adaptor
Connect the power adapter to
the terminal and plug it into
a standard power outlet to
charge the terminal.
Cat 5 Cable
Connect the CAT5 to the
terminal and another end for
LAN connection.
CONTENTS