FingerTec TA100C Series - Viewing the User Guide in the Internet; Terminal Included Accessories

4
AC100C MODEL
Cable Protector
To keep cables intact.
USB Extension
To connect to the USB port
of a computer for uploading
and downloading of data.
Screwdriver
Use the screwdriver to open
the back plate of ngerprint
terminal and to install the
back plate against a wall.
DC 5V Power Adaptor
For supplying power to the
terminal.
A Packet of Bolts
Use the screws to hold the
back plate of the terminal
against a wall.
Siren Cable
For connecting the terminal
to external siren.
CONTENTS
1• GETTING STARTED
Viewing the User Guide in the Internet
The User Guide is available in the package when you purchased the terminal. The User
Guide is also available online at
fingertec.com and user.fingertec.com. Choose the lan-
guage that you prefer for your User Guide.
Terminal Included Accessories
Do not abuse the fingerprint sensor by scratching the surface, contacting the sen-
sor’s surface with heat, pressing hard during placement of fingerprint for verifica
-
tion. Clean the sensor occasionally with microfiber cloth to maintain the perform
-
ance of the sensor.