Need help?Do you have a question about the FingerTec TA100C and is the answer not in the manual?
General| Model | TA100C |
|---|---|
| Type | IP Access Controller |
| Identification Method | Fingerprint, Card, Password |
| Fingerprint Capacity | 3, 000 |
| Card Capacity | 10, 000 |
| Communication | TCP/IP, USB Host |
| Door Control | Yes |
| Humidity | 20% to 80% |
| Fingerprint Sensor | Optical |
| Power Supply | DC 12V |
| Operating Temperature | 0°C - 45°C |
| Inputs | Exit Button, Door Sensor |
| Outputs | 2 |
Essential safety precautions for terminal installation and usage.
Overview of the fingerprint terminal and its capabilities.
Guidance on proper finger placement and conditions for enrollment.
Steps to configure the terminal's date and time settings.
Process for enrolling users, including supervisors and administrators.
Procedures for verifying user identity using fingerprints.
Steps to enroll users with passwords for verification.
Instructions on how to remove user data from the system.
How to verify users using RFID cards for access control.
Configuration of time periods for user access control.
Combining multiple time zones to create group access schedules.
Configuring network settings for TCP/IP communication.
To Next Page
