Need help?Do you have a question about the FingerTec R2 and is the answer not in the manual?
General| Model | FingerTec R2 |
|---|---|
| Type | IP Access Controller |
| Fingerprint Capacity | 3, 000 |
| Card Capacity | 10, 000 |
| Transaction Capacity | 100, 000 |
| Communication | TCP/IP, USB Host |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 20% to 80% |
| RFID Card | Yes |
| Identification Method | Fingerprint, RFID Card |
| Power Supply | 12V DC |
| Type of Card | Mifare |
| Display | LCD |
| Access Control Interface | Electric Lock, Door Sensor, Exit Button |
| Input | Door Sensor, Exit Button |
| Output | Relay Output |
Step-by-step process for activating the FingerTec terminal.
Instructions for registering the terminal for warranty.
Procedures for restarting and factory resetting the terminal.
Steps for activating the FingerTec access control software online.
Guidance on installing and configuring the Ingress software.
Details on linking terminals to the Ingress software via various network methods.
Configuration steps for TCP/IP network connection and settings.
Overview of enrolling users with fingerprints, passwords, or cards.
Detailed steps for enrolling fingerprints accurately.
Process for enrolling RFID, MiFare, and HID cards.
Combining fingerprint and password for enhanced security.
Explains 1:1 and 1:N verification methods for users.
Lists and explains various user verification combinations.
Steps for deleting user data from the terminal.
Optimizing fingerprint enrollment and verification settings.
Setting the threshold for 1:N fingerprint matching.
Setting the threshold for 1:1 fingerprint matching.
Procedure for updating the terminal's firmware via USB.
How to clear all attendance logs from the terminal.
Procedure to erase all data, including user info and logs.
Restores the terminal to its original factory configuration.
How to download attendance logs using a USB drive.
Steps to download user information from the terminal via USB.
How to upload user data from USB to the terminal.
Connecting the terminal for door access control.
Configuring user access permissions, time zones, and groups.
Process for enrolling RFID cards with users.
Using fingerprint as a key for MiFare card security.
Storing fingerprint templates onto MiFare cards.
Duplicating fingerprint templates to MiFare cards for access.
Process for enrolling HID cards into the system.
Solutions for connection issues between terminal and computer.
Troubleshooting common issues with fingerprint reading.
To Next Page
