The terminals accept HID cards with specifications of 1325, 26-bit, 125kHz. The Prox II
cards support 26-bit and it comes with unique programming information into its con-
tents, which include card reading bits, card number range, facility code, site code, etc.
HID cards also applies encryption to the contents o the card to maintain high level of
security and to eliminate duplications.
Registering HID Card
Registration of the HID card is similar to registration of normal RFID cards. Press Menu
> User Manage > Enroll User/Admin > Reg RFID > Do you want to do new enrollment?
> Insert user ID > Wave the card to the induction area and the machine will display the
card number along with the user ID on the LCD > The terminal will display UserID-C
indicating that the user ID has been enrolled with card > OK(Save)
Deleting HID Card
HID cards can be used again and again but the information in the card must be deleted
first before inserting new information.
Press Menu > User Manage > Delete > Input the User ID and wave the card at the induc-
tion area > The LCD will ask whether you want to delete the User ID-C > The terminal
will ask whether you want to delete User ID > And to delete user. Press OK to all.
Once the card has been emptied, it can be used again.
To Next Page
Loading...
Need help?
General
