FingerTec TA100C User Manual

3
CONTENTS
1 • GETTING STARTED
TA100C TA100TC
ImpORTaNT SaFEGUaRDS
INSTaLLaTION LOCaTION
Do not install terminal in areas which are exposed to bright sunlight or rain,
as the fingerprint readers are not designed to work in those areas. Bright
light will interfere with reading of the sensor and fingerprint readers are not
waterproof or vandal proof. It is recommended to protect your fingerprint
terminal with enclosure.
Go to http://accessory.fingertec.com to view the enclosure and other ac-
cessories.
USE OF SENSOR
Do not abuse the fingerprint sensor by scratching the surface, contacting
the sensor’s surface with heat, pressing hard during placement of finger-
print for verification. Clean the sensor occasionally with cellophane tape to
maintain the performance of the sensor.
INTRODUCTION TO TERmINaL

A fingerprint verification terminal is designed to record time and attendance
by using biometrics trait, fingerprint. It is to replace the conventional punch
card system as well as other card systems for time & attendance function.
The fingerprint terminals are capable of recognizing the recorded fingerprint
templates in seconds and therefore, have been successful in eliminating
buddy-punching activity, one of the major problems in human resource man-
agement.
TA100C Series terminals are able to store fingerprint templates from 1,500
for TA102C to 2,800 for TA103C depending on the series chosen. It is also
able to record from 100,000 transactions with TA102C and 120,000 transac-
tions with TA103C, at any given time and those transactions can be download-
ed and cleared up using the management software TCMS V2. TA100C Series
also offers TA103C-R, fingerprint time & attendance system with RFID card
function, TA100TC- touch screen system with card function and TA100TC-R,
color multimedia system with card function.

FingerTec TA100C Specifications

General

Brand	FingerTec
Model	TA100C
Category	IP Access Controllers
Language	English