9
L.E.D Display
LCD
Screen
Keypad
TA200 PLUS MODEL
RFID Card Induction Area
Speaker
Fingerprint
Sensor
Navigation
Keys
Reset Button
USB Port
CONTENTS
ITEM FUNCTION
LCD Screen
Displaying status of terminal, day, date and time.
LED Display Green LED – The terminal is working fine and it is in standby mode.
Red LED – There is an error at the terminal that requires checking. For first
time use, the terminals need to be charged fully to avoid having the red
light blinking.
Keypad To input instructions into the terminal and to allow configuration.
Navigation Keys To navigatien and input command to terminal.
RFID Card Induction Area Area that reads RFID cards.
Speaker For terminal voice emission.
Reset Button To restart the terminal as and when required.
Main Menu
Enroll users, manage user data and input workcode.
Setup FingerTec terminal communication with computer through LAN, RS232 and
RS485. Set security password of the device for a secure data transfer.
Configure the settings of the FingerTec terminals from general to display setting to
fingerprint. Data management, update via USB flash disk, keyboard functions, reset and
other terminal settings can be done here.
Adjust the date and time settings of the terminal.
To Next Page
Loading...
