Finn-Power FP120 IS/AS - User Manual

OPERATING
INSTRUCTIONS
FINN-POWER
FP20 IS/AS ¨
FP20 VS ¨
FP110 IS/AS ¨
FP110 VS ¨
FP120 IS/AS ¨
FP120 VS ¨
FP120S IS/AS ¨
FP120S VS ¨
FP140 IS/AS ¨
FP140 VS ¨
FP140X IS/AS ¨
FP140X VS ¨
MANUFACTURING YEAR
RELEASED 06/00
KEEP THIS MANUAL FOR FUTURE NEEDS
THE MACHINE HAS BEEN DESIGNED FOR CRIMPING HOSE FITTINGS.
LILLBACKA POWERCO SHALL NOT BE HELD LIABLE FOR ANY PRODUCT
WHICH HAS BEEN CRIMPED ON THE MACHINE. THE MACHINE HAS BEEN
DESIGNED TO OPERATE IN ROOM TEMPERATURE, IN DRY INDOOR
CONDITIONS AND IN SUFFICIENT ILLUMINATION. USING THE MACHINE
FOR ANY OTHER PURPOSE IS NOT ALLOWED WITHOUT WRITTEN
CONSENT FROM THE FACTORY.
Lillbacka Powerco Oy
P.O.B. 1
FIN-62301 Härmä, Finland
tel. + 358 6 485 4444
fax
+ 358 6 485 4400

Summary

Safety Warnings and Precautions

General Safety Instructions

Machine for professional use by trained operators; follow instructions and warnings.

Identifying Danger Zones

Identifies hazardous areas and specific warnings indicated by stickers on the machine.

Commissioning the Crimping Machine

Hydraulic Oil Fill Procedure

Fill hydraulic oil to the level sight glass using recommended oil type.

Electrical Connection Steps

Check voltage, connect phases and earth, verify motor rotation direction.

Machine Operation Overview

Control Panel Layout

Control Panel IS;AS Overview

Description of controls and functions on the IS/AS control panel.

Control Panel VS Layout

Control Panel VS Description

Description of controls and functions on the VS control panel.

Setting the Crimping Diameter

Setting Crimping Diameter FP20 IS;AS

Procedure for setting crimping diameter on IS/AS models using the dial chart.

Setting Crimping Diameter VS

Procedure for setting crimping diameter on VS models via the digital display.

Crimping Operations

Manual Crimping Mode

Procedure for manual crimping, used for setup and testing.

Semi-Automatic Crimping Mode

Procedure for semi-automatic crimping, suitable for small quantities.

Automatic Crimping Mode

Procedure for automatic crimping, ideal for serial production.

Machine Troubleshooting Guide

Preventive Maintenance Procedures

Troubleshooting Common Issues

Technical Data FP20

Technical Data FP110 and FP120

Technical Data FP120 S

Technical Data FP140 and FP140 X

Finn-Power FP120 IS/AS Specifications