Finn-Power FP140 IS/AS - User Manual

OPERATING
INSTRUCTIONS
FINN-POWER
FP20 IS/AS ¨
FP20 VS ¨
FP110 IS/AS ¨
FP110 VS ¨
FP120 IS/AS ¨
FP120 VS ¨
FP120S IS/AS ¨
FP120S VS ¨
FP140 IS/AS ¨
FP140 VS ¨
FP140X IS/AS ¨
FP140X VS ¨
MANUFACTURING YEAR
RELEASED 06/00
KEEP THIS MANUAL FOR FUTURE NEEDS
THE MACHINE HAS BEEN DESIGNED FOR CRIMPING HOSE FITTINGS.
LILLBACKA POWERCO SHALL NOT BE HELD LIABLE FOR ANY PRODUCT
WHICH HAS BEEN CRIMPED ON THE MACHINE. THE MACHINE HAS BEEN
DESIGNED TO OPERATE IN ROOM TEMPERATURE, IN DRY INDOOR
CONDITIONS AND IN SUFFICIENT ILLUMINATION. USING THE MACHINE
FOR ANY OTHER PURPOSE IS NOT ALLOWED WITHOUT WRITTEN
CONSENT FROM THE FACTORY.
Lillbacka Powerco Oy
P.O.B. 1
FIN-62301 Härmä, Finland
tel. + 358 6 485 4444
fax
+ 358 6 485 4400

Summary

Safety Warnings and Danger Zones

General Safety Precautions

Essential safety guidelines for operating the machine and handling its parts.

Identifying Danger Zones

Highlights specific areas on the machine that pose a risk during operation.

Commissioning the Machine

Oil Fill and Electrical Connection

Procedures for filling hydraulic oil and making proper electrical connections.

Operation - Control Identification FP20

Operation - Control Identification FP110;FP120;FP140;FP140 X

Operation - Control Identification FP120 S

Control Panel IS;AS Overview

IS;AS Control Panel Components

Explains the functions of buttons like Emergency Stop, Start, Stop, and operational indicators.

IS;AS Mode Selector and Operation Modes

Details the mode selector and the manual/semi-automatic operation modes.

Control Panel IS;AS Operation Details

IS;AS Automatic and Foot Pedal Modes

Describes automatic mode, foot pedal operation, and crimping delay settings.

IS;AS Diameter Control and Adjustment

Explains how to adjust crimping and retraction diameters using the control dials.

Control Panel VS Overview

VS Control Panel Buttons and Functions

Describes the functions of the EMERGENCY STOP, START, STOP, and ENTER buttons.

VS Selector and Display Adjustment

VS Operation and Settings

VS Operation Modes: Semi-Automatic, Automatic, Foot Pedal

VS Crimping and Retraction Settings

VS Data Storage and Setup

Test Run Procedures

Test Run IS;AS

Test Run VS

Installing the Die Set

Quick Change FP120 S

Quick Change FP140 and FP140 X

Setting the Crimping Diameter FP20

Setting the Crimping Diameter VS

Setting Crimping Diameter FP110, FP120, FP120 S, FP140, FP140 X

Setting Crimping Diameter IS;AS

Crimping Operation Modes

Manual Mode Crimping

Semi-Automatic Mode Crimping

Automatic Mode Crimping

Automatic Mode; Foot Pedal Operation

Retraction Diameter Adjustment IS;AS

Troubleshooting Machine Issues

Preventive Maintenance Overview

Greasing and Cleaning FP20

Greasing and Cleaning FP110, FP120, FP120 S

Greasing and Cleaning FP140, FP140 X

Cleaning FP120 Master Dies

Hydraulic Oil Change FP20

Hydraulic Oil Change FP110;FP120;FP120 S;FP140;FP140 X

Troubleshooting Guide

Finn-Power FP140 IS/AS Specifications

General

Brand	Finn-Power
Model	FP140 IS/AS
Category	Industrial Equipment
Language	English