Fintek iCOOL - Page 21

9.3.2 Cooling mode
1. Setting
temperature range˖18ć-30ćDŽ
2.
Compressor working conditions˖ a. Compressor works when RTST+1ć˗
b Compressor stops when RT ST
-
1
ć
˗
b
.
Compressor
stops
when
RT
ST
1
ć
˗
c. -1ć˘RT-ST˘+1ćˈcompressor maintains the original stateDŽ
(RT: room temperature, ST: setting temperature)
3. Four-way valve
working conditions: no power supply.
4.
Outdoor fan motor working conditions: start or close same time as the compressor.
5. Indoo
r fan speed contro
l:
I d f ill k A t d l d iddl d hi h d
a.
I
n
d
oor
f
an w
ill
wor
k
as
A
u
t
o spee
d
,
l
ow spee
d
, m
iddl
e spee
d
or
hi
g
h
spee
d
.
b.
For Auto speed, indoor fan will work as following chart:
Fan speed
High speed
Middle speed
Low speed
-1ć 1ć 2ć 5ć RT-TS
9.3.3 Dry mode
1. Setting
temperature range˖18ć-30ćDŽ
2. Working conditions˖unit would work according to indoor temperature and setting temperature.
NO. conditions Indoor fan motor Outdoor fan
motor
compressor Four-way valve
1RTST Fixed with low speed Keep running no power supply
2
RT
<
ST
Works for 10 minutes, then
2
RT ST
Works
for
10
minutes,
then
stops for 6 minutes
Note: In dry mode, after unit goes into dry cycle, it will not change the working cycle when indoor
temperature changed.
1) When
RT14ćˈdry mode no works, indoor fan works with low speed. When RT>16ć, unit
would
work normally.
2
)
Four-wa
y
valve˖no power suppl
y
.
)
y
y
3) Outdoor fan motor working conditions: start or close same time as the compressor.
(RT: room temperature, ST: setting temperature)