Need help?Do you have a question about the Fire-Lite Alarms ES-200X and is the answer not in the manual?
General| Type | Fire Alarm Control Panel |
|---|---|
| Power Supply | 6.0 A total system power |
| Operating Voltage | 24 VDC |
| Battery Backup | Yes |
| Built-in digital communicator | Yes |
| NAC Circuits | 4 |
| Number of Notification Appliance Circuits (NACs) | 4 |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Relative Humidity | 10% to 93% non-condensing |
| Battery Capacity | 7 Ah |
| Weight | 10 lbs |
| Annunciators | Optional |
Details limitations of smoke detectors regarding smoke sensing and particle flow.
Emphasizes grounding and proper handling of static-sensitive components to prevent damage.
Step-by-step instructions for mounting the FACP backbox and chassis securely.
Covers core programming functions like autoprogram, point, and zone setup.
Access to maintenance functions like disabling points and performing walktests.
Details the system's response and display during an alarm condition.
Details on enabling and performing local or remote downloads with FS-Tools.
Steps for uploading or downloading configuration via a USB flash drive.
Guidance on updating the panel's embedded software.
Method for calculating total current draw for AC and battery power sources.
Steps to calculate the necessary battery capacity based on system load.
To Next Page
