Need help?Do you have a question about the Fire-Lite Alarms MS-9600UDLS and is the answer not in the manual?
General| Brand | Fire-Lite Alarms |
|---|---|
| Model | MS-9600UDLS |
| Category | Control Panel |
| Language | English |
Details the advanced features and optional modules of the FACP system.
Describes the front panel controls, LCD display, and LED indicators for system status.
Outlines the main hardware components of the FACP, including circuit boards, cabinet, and power supply.
Provides instructions for physically mounting the FACP cabinet and chassis.
Details the AC power, earth ground, and battery power connections required for the FACP.
Explains the installation procedures for optional modules like DACT-UD2 and 4XTMF transmitter.
Covers methods for site-specific programming using the FACP keypad or PC.
Outlines the main programming categories available at the Master Level.
Details how to add, delete, or edit addressable detectors and modules.
Explains how to configure system-wide features like timers, NACs, and relays.
Instructions for changing Master, Maintenance, and Remote Download passwords.
Explains the functions of the FACP's front panel buttons like Acknowledge, Silence, and Reset.
Details how the FACP indicates and responds to trouble conditions.
Explains how the FACP operates and displays during an alarm condition.
Outlines the procedure for performing system walktests to verify device functionality.
Explains how to view system status, programming, and configuration details.
Provides methods for calculating primary and secondary power supply current loads.
Guides users on calculating the necessary battery capacity for system standby power.
Explains the concept of software zones and how input/output devices are assigned.
Lists default programming settings for detectors, modules, zones, loops, and system options.
Lists default settings for system setup, NACs, timers, and related features.
Lists default settings for annunciators, DACT, printer, and communication interfaces.
Lists requirements for connecting the FACP to central or remote station services.
Outlines requirements for auxiliary fire alarm system applications.
Provides tables for NAC wiring requirements, including wire gauge and length.
Explains how to use control modules for HVAC SHUTDN functionality.
Details the use of monitor modules for HVAC RESTART and OVRRIDE functions.
Covers specific requirements and configurations for Canadian installations.
Details the warranty coverage and limitations for the FACP products.
To Next Page
