EasyManua.ls Logo

Fire Sense 02110 - Package Contents; Parts List Identification; Installation Requirements

Fire Sense 02110
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Contact us for assistance: (866) 985-7877 | www.balkenehome.com 5
PACKAGE CONTENTS
PARTS LIST
1 - IR Head unit w/Protective Aluminum Shield with:
Pre-installed wall-mount component
Alumin
um main heating unit w/ 1500W quartz halogen
lamp, swivel bracket, and 16/3 grounded electrical cord
2 - Wall Mounting Bracket
3 - Hardware
4x threaded bolts w/ lock washers
Phillips pan head
4x wall anchor
1x Short set-screw
1
2
The unit MUST be plugged into a
de
dicated circuit with a grounded
outlet. If installed outdoors, use a
certified GFI (ground fault
interrupt) outlet to protect against
electric shock.
Ensure that the heater mount bracket is SECURELY fastened
to the wall, patio overhang, or house eave.
Route electrical cable AWAY from main body of heater,
which gets very hot.
Do NOT cover or obstruct the main body of the heater
during use.
Installation must be in accordance with I.E.E. safety
regulations or equivalent. If you are unsure, consult an
electrical service professional.
Avoid using an extension cord with this appliance.
Do not place any objects such as furniture, papers, clothing,
or curtains closer than 3 ft to the front and sides of the
heater.

Other manuals for Fire Sense 02110

Related product manuals