Contact us for assistance: (866) 985-7877 | www.balkenehome.com 6
ASSEMBLY
1
PREPARATION
Before beginning assembly, be sure to read and familiarize yourself with the overall assembly process and instructions in this
manual. It may be helpful to have someone assist you with the assembly. You will need the following tools (NOT INCLUDED):
#2 or #3 Philips Screwdriver (or standard slotted screwdriver)
Adjustable Wrench, pencil, drill with 5/16 bit, ladder
Complete any
assembly on a clean, level, nonabrasive location. A flat piece of
cardboard will also work for assembly. Unpack and identify all components listed
on page 3 of this manual and lay them out on the carpeted floor or protected
work surface, then follow the steps below:
ASSEMBLY
To Next Page
Loading...
