Need help?Do you have a question about the Firecom UHW-Series and is the answer not in the manual?
Overview of the UHW series wireless headsets designed for under-the-helmet use.
Overview of the FHW series wireless headsets designed for over-the-head use.
Guidance on adjusting the headset for proper fit and maximum hearing protection effectiveness.
Includes NRR information and federal law requirements regarding hearing protection.
Details on headset power switch, volume control, and initial pairing with the base station.
Information on out-of-range warnings and the headset's automatic reconnection feature.
Explanation of the green and red LED indicator functions during charging and operation.
Instructions on correct microphone positioning for optimal noise gating and audio clarity.
Procedure for cleaning or replacing the microphone muff to prevent pops and hisses.
Details on PTT buttons for different intercom models and the headset pairing procedure.
Graphical representation of available microphone volume and noise gate threshold settings.
Step-by-step guide to adjust headset microphone volume and noise gate threshold.
Ensuring the headset is fully charged before operation, including vehicle and wall adapter charging.
Important notice regarding the installation of the fuse assembly for the charging cable.
Procedure to reset the headset in rare cases by plugging in the charger.
Instructions for cleaning, maintaining, and inspecting the headset for defects.
Detailed technical specifications for the headset and microphone components.
Specifications related to the radio frequency performance, including range and digital encoding.
Details on the headset's power source, battery life, and environmental operating conditions.
Information on FCC/IC compliance, rules, and RF exposure guidelines.
Details of the two-year limited warranty for the original purchaser.
To Next Page
General