Safety Instructions
Working safely with the measuring tool is possible when the operating and
safety information are read completely and the instructions contained therein
are strictly followed. Never make warning labels on the measuring tool
unrecognizable. Save these instructions for reference.
WARNING
LASER RADIATION. Do not stare into beam. Class II laser product. Turn the
laser beam on only when using this tool.
• Do not operate the laser in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
• Use the laser only with the specifically designated batteries. Use of any other
batteries may create a risk of fire.
• Store idle laser out of reach of children and other untrained persons. Lasers
are dangerous in the hands of untrained users.
• Do not use tool if switch does not turn it on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Do not use optical tools such as a telescope or transit to view the laser beam.
Serious eye injury could result.
• Do not place the laser in a position which may cause anyone to intentionally
or unintentionally stare into the laser beam. Serious eye injury could result.
• Do not position the laser near a reflective surface which may reflect the laser
beam toward anyone’s eyes. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on increases the risk
of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may result in
To Next Page
Loading...