Maintenance
This 3x360° Self-leveling Line Laser has been designed to be a low-
maintenance tool.However, in order to maintain its performance, you must
always follow these simple directions:
• Avoid exposing the tool to shock, continuous vibration or extreme hot or
cold temperature.
• Always store the tool indoors.
• Always keep the tool free of dust and liquids. Use only a clean, soft cloth
for cleaning. If necessary, slightly moisten the cloths with pure alcohol or a
little water.
• Do not disassemble the self-leveling 360-degree cross line laser; this will
expose the user to hazardous radiation exposure.
• Do not attempt to change any part of the laser lens.
• Remove the battery from the tool and store it in a cool dry location.
• After you have finished using the tool, always make sure that the switch is
in the OFF position.
To Next Page
Loading...