Heating Chamber
Mouthpiece
Vapor Path
Concentrate Pad Removal
CLEANING
• Use small brush and tooth pick to get out larger particles,
then swipe clean with alcohol wipe.
• Allow chamber to dry completely before vaping.
IMPORTANT: Do not pour alcohol into the heating chamber.
• Hold Firefly 2+ in one hand and push mouthpiece to one side
with other hand. Wiggle left and right until removed.
• Remove particulate with enclosed cleaning pick.
• Replace mouthpiece one side at a time until it clicks into place.
• Use alcohol wipes to clean surfaces of vapor path on the
chassis and the lid.
IMPORTANT: Be gentle when wiping down the top lid to
avoid damaging the gasket. DO NOT WIPE THE SILICON
GASKET ITSELF.
• Material in the pad can become sticky. Preheat the
Firefly 2+ for 10-15 seconds to loosen any extra material
and then use the pick from the cleaning kit to pry up
the edges of the pad and remove.
• Cleaning the concentrate pads is not recommended.
IMPORTANT: Please remove your battery before cleaning
your device.
11