1. Remove the magnetic lid by lifting up on
either side.
2. Use coarsely-ground material. The grind
should be small and crumbled but not too
fine. A powdery grind will cause pull-through.
3. Fill the glass chamber slightly past the rim
and tamp down gently.
4. Ensure the interior surfaces are completely
free of debris for a tight seal.
5. Replace the lid and make sure it is seated
correctly.
6. Make sure the glass chamber is completely
filled with material for best performance.
correctly.
USING LOOSE LEAF
Packing Loose Leaf
07
To Next Page
Loading...
Need help?
General
