Heating Control: From Device
FIREFLY APP
• Press and hold the right button.
• Tap the left button 3 times quickly, just like checking the
temperature (while still holding the right button).
• This puts the Firefly 2+ into “temperature setting” mode.
• The LED blinks red 1 to 7 times, to indicate what the current
set temperature is.
• Tap the left button again (while still holding the right button)
now sets the temperature to:
IMPORTANT: Concentrates setting will cause combustion if used
with loose leaf material!
7 TAPS (CONCENTRATES)
6 TAPS (HIGH)
5 TAPS (MED HIGH)
4 TAPS (MED)
3 TAPS (MED LOW)
2 TAPS (LOW)
1 TAP (ULTRA LOW)
500
420
400
380
360
340
320
16
To Next Page
Loading...