Need help?Do you have a question about the Firefly VEGATOUCH Coach House V4 and is the answer not in the manual?
General| Category | Home Automation |
|---|---|
| Model | VEGATOUCH Coach House V4 |
| Connectivity | Wi-Fi, Bluetooth |
| Manufacturer | Firefly |
| Display Size | 7" |
The primary dashboard displaying key information and controls for the coach systems.
Controls all interior and exterior lighting functions, including dimming.
Configures the automatic generator start system based on voltage or HVAC triggers.
Manages heating, cooling, and fan settings for the coach interior.
Provides access to system configurations, network, and floorplan options.
Manages generator start, stop, and displays accumulated operating hours.
Displays percentage filled for holding tanks and LP tank.
Shows voltage status for House and Chassis batteries.
Controls dimmable lights using up/down arrows for brightness adjustment.
Provides individual on/off control for all coach lighting.
Sets automatic triggers for generator start based on voltage or HVAC load.
Sets the voltage threshold for the generator to start.
Duration voltage must remain low before the generator starts.
Sets the voltage threshold for the generator to stop.
Duration voltage must remain high before the generator stops.
Sets the minimum operating time for the generator after starting.
Sets the maximum operating time for the generator after starting.
Configures the number of attempts the generator will make to start.
Procedure to reset or synchronize generator operating hours.
Activates air conditioning to reach and maintain the desired temperature.
Activates the heat pump to reach and maintain the desired temperature.
Activates the furnace to reach and maintain the desired temperature.
Automatically manages HVAC systems to keep the desired temperature consistent.
Manages vent fan speed, lid operation, and power.
Displays system status and identifies network faults.
Provides information on wireless switch panel status and connectivity.
Accesses the Vegatouch Eclipse connection screen for app pairing.
Shows the currently selected coach floorplan.
Allows adjustment of the touchscreen display's brightness level.
Manages screen sleep mode based on inactivity and timed intervals.
Temporarily disables touchscreen functionality for cleaning purposes.
Option to switch between Fahrenheit and Celsius for temperature display.
Configures the system clock and the 24-hour time display format.
Instructions for downloading and connecting the Vegatouch Eclipse mobile app.
Displays the unique ID and PIN for connecting the Eclipse module.
Shows the operational status of the Lyra screen and G12 panel.
Lists current system faults and provides access to diagnostic information.
Displays the status of G12 panel inputs like Park Brake and Ignition.
Lists all G12 outputs and their current active status.
Shows firmware version and operational status of Aircon controllers.
Displays operational status for Main and Rear Vent Fan controllers.
Alerts users to outputs turned off due to overcurrent faults.
Procedure to reset faulted outputs via the diagnostics screen.
Identifies wireless switch panel status via color-coded graphics and signal strength.
Explains the procedure for pairing wireless switches to the touchscreen interface.
Allows selection and confirmation of the correct coach floorplan.
Enables or disables specific coach features like Generator Controls or Awning Lights.
Steps to initiate the pairing process for wireless switch panels.
Confirmation message displayed upon successful wireless switch pairing.
Procedure to enable service mode, which removes hold delays on protected areas.
Procedure to disable service mode using the red wrench icon.
Locating the Eclipse module's login ID and PIN for initial setup.
Instructions for obtaining and installing the Vegatouch Eclipse mobile app.
Steps to scan, connect, and authenticate the Eclipse module.
Instructions for enabling location services on Apple devices.
Instructions for enabling location services on Android devices.
Option to switch between Fahrenheit and Celsius display.
Displays app, module, and configuration versions.
Manage devices paired with the Eclipse module, including removal.
Steps to connect the system to a Wi-Fi network.
Allows quick connection to previously used Wi-Fi networks.
Configure wired ethernet connection settings.
Procedure to disconnect from the Eclipse module and associated warnings.
Changes the system's connection mode between local and remote.
Option to update system configuration from the cloud.
Accesses tools to diagnose system issues and view connected devices.
Information on obtaining remote technical support for system issues.
Allows setting a custom PIN for the Eclipse module.
Procedure to completely reset the device to factory defaults.
Explains the dimming functionality of SSP17 panels for lights.
Indicates command sent status via an operational LED on the panel.
Instructions for replacing the 2032 coin cell battery in switch panels.
Lists numbered circuits and their functions on the G12 panel.
Guide on testing output voltage for specific G12 pins.
Identifies the location of network status LEDs on system components.
Key for understanding network status indicators on devices.
Explains the operational status based on LED colors and patterns.
Details for high current output channels and their loads.
Specifications for high current relay outputs.
Information on G12 thermistor and temperature sensor connections.
Details for tank level and LPG sensor inputs.
Specifications for half bridge outputs and general system inputs.
Wiring and switch panel layout for the 272XL coach model.
Explanation of symbols and colors used in network diagrams.
Wiring and switch panel layout for the Arriva coach model.
Wiring and switch panel layout for the Diesel coach model.
Wiring and switch panel layout for the Front Sofa coach model.
Wiring and switch panel layout for the Multi coach model.
Wiring and switch panel layout for the Queen coach model.
Wiring and switch panel layout for the Non-Slide coach model.
To Next Page