The Light Master controls all interior lights at once. When Light Master Off is pressed, it will remember
which lights were on. Then, when Light Master On is pressed, it will only turn on the lights that are in
memory. To turn on all lights again, press and hold Light Master On for at least one second.
*Troubleshooting – Memory is rewritten each time Light Master Off is pressed. In the case that it is
pressed twice in a row, it will remember that no lights were on and just touching Light Master On won’t
turn on any lights. Press and hold Light Master On to turn the lights back on.
Slide/Awning – This section of the screen will toggle between the Slide control or Awning control based
on the Parking Brake/Ignition inputs currently being received by the G12 panel.
Slide – Press and Hold EXT or RET to operate the Slide.
Awning – Tap the Awning button to fully extend or retract the awning.
Climate Control – Tap the arrows to select your desired temperature. The current temperature and
climate control mode will display on the home screen. A white fan graphic will represent Fan mode, a
blue snowflake will represent Air Conditioning, a red flame graphic will represent the Furnace. Auto
mode will display the graphic for the system that is currently running.
To Next Page
Loading...