Your G12 control panel is the power distribution center for
the coach. This panel receives the signals sent from your
switch panels and performs the actions that have been
requested by activating and deactivating the required circuits.
Every circuit controlled by the G12 is numbered and listed on
a black label (load list) which is usually mounted next to the
G12 panel. Troubleshooting Example - If you press the Front
Accent Lights button on your Lyra screen and the lights don’t
come on, check the Network Diagnostics Page to see if the
light for Output 27 shows status. If it does, you will want to
check output voltage on that pin to make sure that the G12 is
sending power to the lights (Fig 1).
To Next Page
Loading...