What to do if the Firesense 61710 Swimming Pool Heater burner flame is low?
A low burner flame can result from several issues. The pressure might be low, necessitating replacement of the LPG tank. Alternatively, the tank could be low on fuel, requiring a refill. Inspect the gas hose for kinks; straighten or replace it if needed. Also, if the control knob is at maximum, check for obstructions in the passageways and orifices.
Why won't the main burner light on my Firesense 61710 Swimming Pool Heater?
Several factors can prevent the main burner from lighting. First, ensure the gas valve is turned ON. Check if the fuel tank is empty and refill it if necessary. A blocked orifice can also be the culprit, so clean or replace it. Air in the supply system can cause issues; purge the air from the lines by opening the gas lines and depressing the control knob for 2-3 minutes. Inspect all fittings for loose connections. If the igniter is failing, try manually lighting it with a stick lighter. Low gas pressure, even with the valve open, may require replacing the cylinder or regulator. For a new cylinder or the first ignition, purge air from the lines. If the cylinder valve is on but there's no gas flow, replace the hose/regulator assembly. Finally, a dead AAA battery behind the igniter button wil...
Safety precautions related to fire, explosion, and flammable materials.
Warnings about carbon monoxide poisoning and ventilation requirements.
General safety alerts including outdoor use and property damage prevention.
Warnings regarding California Proposition 65, burn hazards, and hot surfaces.
Cautions on service safety, leak testing, and preventing heat damage.
Lists reflector center cap, panels, and head assembly parts.
Lists tank housing, post supports, and base components.
Lists wheel brackets, axles, wheels, and grounding brackets.
Details various bolts and screws used in assembly.
Lists nuts, washers, wing nuts, and wing bolts.
Instructions to check all parts against the contents list before assembly.
Lists required tools and the need for an AAA battery for ignition.
Instructions for attaching grounding brackets for stability.
Details attaching wheels, axles, and securing them to the base.
Attaching post supports to the base and affixing the tank chain.
Securing the post/post support plate to the supports.
Affixing burner brackets and connecting gas hose/regulator.
Assembling reflector panels with the center cap using screws and wing nuts.
Connecting the head assembly to the burner support brackets.
Connecting the regulator to the LP cylinder and securing the tank.
Steps for performing a leak test using a soapy water solution.
How to identify and address leaks based on bubble formation.
Ensuring proper gas supply, clearing area, and checking ventilation.
Checking heater condition, hose assembly, and waiting before re-lighting.
Step-by-step guide for igniting the heater, including battery installation.
Description of normal operation, flame color, and troubleshooting yellow flames.
Procedure for safely re-lighting and shutting down the heater.
A comprehensive checklist for safe operation before each use.
Instructions for cleaning exterior surfaces using soapy water.
Ensuring clear airflow, cleaning burner orifices, and preventing carbon deposits.
Recommendations for storage between uses and service by qualified personnel.
Diagnosing and correcting problems with the main burner not lighting.
Addressing issues like low flame, kinked hoses, and thick black smoke.
List of major parts with descriptions and quantities for replacement.
Details of the 5-year limited warranty for customers in the Continental US.
Covers what the warranty does not cover and liability limitations.
Information on how to contact customer service for warranty issues.
General| Brand | Firesense |
|---|---|
| Model | 61710 |
| Category | Swimming Pool Heater |
| Language | English |
To Next Page