Firetrol FTA740 Series User Manual

8
Connect the input power and the motor on their respective terminals. Secure with the appropriate torque as indicated
on the torque label and verify all connections. Secure the door in closed position then put the circuit breaker
disconnecting means in ON position. Verify the readings on the controller main screen.
Once the controller has booted up, the “First Start Up” page appears. The controller will automatically detect and
display the frequency of the power source. It is then possible to manually choose the frequency of the voltage.
Press the padlock icon and enter a valid authorization code.

Firetrol FTA740 Series Specifications

General

Brand	Firetrol
Model	FTA740 Series
Category	Controller
Language	English