Need help?Do you have a question about the Firetrol FTA1100 Series and is the answer not in the manual?
General| Type | Fire Pump Controller |
|---|---|
| Phase | 3-Phase |
| Frequency | 50/60 Hz |
| Humidity Range | 0-95% non-condensing |
| Enclosure | NEMA 4, NEMA 4X |
| Pump Type | Electric Fire Pump |
| Output Current | Varies by HP rating |
| Dimensions | Varies by model and enclosure type |
| Weight | Varies by model and enclosure type |
Details various starting and stopping methods for the controller.
Outlines electrical wiring standards per NFPA 20, NFPA 70, and Canadian Electrical Code.
Explains power source requirements and connection/disconnection procedure for batteries and AC power.
Mentions the Quick Start-Up Guide and the importance of the rating label.
Warns about battery aging and explains alarm bell activation, silencing, and automatic stopping.
States that First Setup is required before using the controller and enabling automatic mode.
Directs users to the full manual for detailed configuration information.
To Next Page
