Firex CUCIMAX CBTG 310 - 13 CREATING PROGRAMS (MULTI-PHASE); 13.1 CREATING;DELETING PHASES

CREATING
PROGRAMS (MULTI
-
PHASE)
02
-
CBT
-
TOUCH
-
DU
-
01
-
EN
33
13 CREATING PROGRAMS (MULTI-PHASE)
FROM SETTINGS> PROGRAMS> NEW
NEW PROGRAM
01:27: 35
17/12/ 2016
100°C
20°C
180°C
20°C
00:45:00
--:--:--
A PROGRAM CAN CONSIST OF 20 PHASES.
THE PARAMETERS ARE CONSTANT WITHIN EACH PHASE. IF A SINGLE VALUE CHANGES, YOU
NEED TO CREATE A NEW PHASE!
THE CREATION OF THE PHASE CONSISTS OF ENTERING THE COOKING METHOD, COOKING
TIMES, MIXER FUNCTIONS AND WALL HEATING.
IT IS ALSO POSSIBLE TO ENTER (IN EVERY PHASE) 3 MESSAGES PRESENT IN THE LEFT
COLUMN. (SEE MESSAGE SETTINGS)
13.1 CREATING/DELETING PHASES
ONCE THE PARAMETERS OF PHASE 1 ARE SET, YOU CAN THEN ADD PHASE 2:
> >
AFTER HAVING ADDED AND SET THE PARAMETERS OF PHASE 2, PRESSING ON THE
PHASE/PHASE FIELD DISPLAYS THE FOLLOWING SCREEN: