INSTRUCTION MANUAL FOR INSTALLATION, MAINTENANCE AND
USE Rev−12
PMKIE−DIMU−GB−12
20
GB
INDIRECT TILTING PANS, ELECTRIC TYPE
ˆPMKIE100˜ ˆPMKIE150˜ ˆPMKIE200˜ ˆPMKIE300˜ ˆPMKIE500˜
4.2.2 SWITCHING ON, START COOKING AND SWITCHING OFF
− Fill the vat with hot or cold water, according to need, using the tap that the appliance is equipped with.
− The appliance has a three-position selector to start cooking functions (see figure “Controls").
− Here is a list of the procedures for a safe and correct use of the appliance.
Energising the unit:
− Connect the appliance by turning on the main switch installed before it.
Start of cooking:
− Turn the selector from position “0” to one of the heating positions according to cooking requirements.
− The green light turns on automatically.
− Generally cooking is started with the selector in position “2”; once the vat has reached cooking
temperature, turn the selector to “1” to maintain it.
− Set the operating thermostat knob on the desired temperature between 40 and 100°C.
− Heating will start and the orange light will turn on automatically.
− The orange light will turn off as soon as the set temperature has been reached.
− To make water boil quickly, turn the knob over the temperaure of 100°C.
− Heating elements operate continuously.
− By turning the selector from position “2” to “1”, it is possible to keep the water boiling and use less power.
End of cooking:
− Turn the selector to position “0”
To Next Page
Loading...
General