Firex UDBRE A V1 Series - Page 53

CREATING PRO
GRAMS (MULTI
-
PHASE)
01
-
UDBRE.A_V1
-
DIMU
-
00
-
EN
53
MESSAGE SETTINGS KEYS
THE KEY ON THE TOP RIGHT TAKES ON THE FOLLOWING FUNCTIONS SPECIFIED IN RELATION
TO THE SELECTED MESSAGE (START; SET °C: END)
START MESSAGE
Key
Behaviour when program running
 No message appears
 The message appears
 The heating starts at "ON"

If the time is set
, the countdown begins
 The message appears
 The heating stays "OFF" until you reply to the message
 If the time is set , the countdown begins when you reply to the
messag
e.
MESSAGE ON REACHING SETPOINT
Key
Behaviour when program running
 No message appears
 The message appears
 Heating keeps the SETPOINT

If the time is set , the countdown begins
 The message appears
 Heating keeps the SETPOINT
 If the time is set , the countdown begins when you reply to the
message.
END OF PHASE MESSAGE
Key
Behaviour when program running
 No message appears
 The message appears
 Heating keeps the SETPOINT
 When the countdown has ended, it is possible to increase the cooking time or
move on to the next phase.