OPERATOR’S
GUIDE
FOR
PPC6000
SERIES
DESCRIPTION:
This document supplies the owner/operator with sufficient information to make
appropriate changes to operating parameters associated with normal boiler plant
needs. Items such as system setpoint adjustments e.g. temperature, pressure, PID
adjustments and alarm corrective action and adjustments.
The following items are covered in this manual:
1 Introduction _____________________________________________________2
2 General _________________________________________________________2
3 Password _______________________________________________________2
4 Adjusting Cut IN and Cut OUT_____________________________________3
5 Manual Modulation ______________________________________________4
6 Resetting the Control _____________________________________________4
7 Fault and Fault Finding __________________________________________11
8 Fault subsets ___________________________________________________11
9 Fault listing ____________________________________________________12
10 PID Tutorial____________________________________________________18
11 The Startup / Shutdown Stages ____________________________________19
NXOG-6001
MARCH 9, 2007
To Next Page
Need help?
General
