EasyManua.ls Logo

Firman 1201 - Introduction; Important Safety Information

Firman 1201
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Thank you for purchasing a FIRMAN product.
Important Safety Information
INTRODUCTION
English Customer Service: 1-844-FIRMAN1
01
This manual contains safety information to make you aware of the hazards and risks associated
with this product and how to avoid them. This product is designed and intended only for supplying
electrical power for operating compatible electrical lighting, appliances, tools and motor loads,
and is not intended for any other purpose. It is important that you read and understand these
instructions thoroughly before attempting to start or operate this equipment.
Save these original instructions for future reference.
This manual covers operation and maintenance of the FIRMAN parallel kit. All information
in this publication is based on the latest production information available at the time
of approval for printing. The manufacture reserves the right to change, alter or other
wise improve the parallel kit and this documentation at any time without prior change.
WARNING
READ AND UNDERSTAND ALL INSTRUCTIONS.
WARNING
To reduce the risk of injury, user must read and understand the operator’s manual for their
generator and this instruction sheet. Ensure compatibility and fit before using any accessory.
Do not use an accessory if a part is damaged or missing. If you are not comfortable performing
any of the functions described in these instructions, take your unit to an authorized service center.
This product is for outdoor use only.
Do not connect or disconnect parallel kit while generator is running. Doing so can
cause permanent damage not covered under warranty.
Do not get the product wet. Do not use if this product is exposed to moisture.
Do not disassemble. This product has no userserviceable parts.
As with all electrical devices, use caution when plugging and unplugging this unit into
an outlet or plugging/unplugging other devices into this unit. Do not force this unit into
an outlet. Do not force plugs into this unit.
If required, use only certified approved extension cords with this product.
If this product is used in a manner not specified by the manufacturer, the protection
provided by this equipment may be impaired.
Do not overload the parallel kit. The kit can supply a maximum of 50 Amps at 120 Volt
or 6000 Watts per outlets depending on the rating of the inverter generators.
Do not parallel more than two inverter generators.
Link two inverter generators together for 90-95% of the sum of the two inverter wattage
rating (depends on the models).
Save these instructions. Refer to them frequently and use them to instruct others who
may use this product. If you loan someone this product, loan them these instructions also.
Use only FIRMAN inverters or paralleling.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Related product manuals