English Customer Service: 1-844-FIRMAN1Page 11
8. Do not over-choke. As soon as engine
starts and warms up, move the choke lever to
the “RUN” position.
9. Allow generator to run at no load for few
minutes upon each initial start-up to permit
engine and generator to stablize.
Starting the Generator (Recoil Start-LPG]
1. Before starting the generator, check for loose
or missing parts and for any damage which
may have occurred during shipment.
2. Check oil level .
6. Move choke lever located on engine to “START” position.
To Next Page
Loading...
